Source / Sound synthesis

dtmf

Generate DTMF tones.

Type:

(?duration : float, ?delay : float, string) -> source(audio='a)
where
  'a is a track of type: pcm, pcm_s16, pcm_f32, yuv420p, metadata or track_marks and a track of type: pcm, pcm_s16 or pcm_f32

Composition:

This source inherits composition from its effective source.

Arguments:

• duration (of type float, which defaults to 0.1): Duration of a tone (in seconds).
• delay (of type float, which defaults to 0.05): Dealy between two successive tones (in seconds).
• (unlabeled) (of type string): String describing DTMF tones to generates: it should contains characters 0 to 9, A to D, or * or #.

Methods:

• buffered (of type () -> [string * float]): Length of buffered data.
• clear_last_metadata (of type () -> unit): Clear the last metadata from the source.
• clock (of type clock): The source's clock
• duration (of type () -> float): Estimation of the duration of the current track.
• elapsed (of type () -> float): Elapsed time in the current track.
• fallible (of type bool): Indicate if a source may fail, i.e. may not be ready to stream.
• generate_frame (of type () -> unit): Generate a frame from the source without consuming it. This can be useful in advanced cases where generating a frame is required to trigger some side effect like calculating some metadata before making a decision. You should make sure that the source is available before calling this function and it should only be called inside synchronous streaming loop callback such as on_frame!
• id (of type () -> string): Identifier of the source.
• insert_metadata (of type (?override : bool, ?new_track : bool, [string * string]) -> unit): Dynamically insert metadata in a stream. Inserts a new track with the given metadata if new_track is true. When override is false, metadata that the source provides itself takes precedence over the inserted one.
• is_active (of type () -> bool): true if the source is active, i.e. it is continuously animated by its own clock whenever it is ready. Typically, true for outputs and sources such as input.http.
• is_ready (of type () -> bool): Indicate if a source is ready to stream. This does not mean that the source is currently streaming, just that its resources are all properly initialized.
• is_up (of type () -> bool): Indicate that the source can be asked to produce some data at any time. This is true when the source is currently being used or if it could be used at any time, typically inside a switch or fallback.
• last_metadata (of type () -> [string * string]?): Return the last metadata from the source.
• log (of type {level : (() -> int).{set : (int) -> unit}}): Get or set the source's log level, from 1 to 5.
• queue (of type () -> [source(audio='A)] where 'A is a track of type: pcm, pcm_s16, pcm_f32, yuv420p, metadata or track_marks and a track of type: pcm, pcm_s16 or pcm_f32): Return the current sequence of source
• register_command (of type (?usage : string?, description : string, string, ((string) -> string)) -> unit): Register a server command for this source. Command is registered under the source's id namespace when it gets up and de-registered when it gets down.
• remaining (of type () -> float): Estimation of remaining time in the current track.
• reset_last_metadata_on_track (of type (() -> bool).{set : (bool) -> unit}): If true, the source's last_metadata is reset on each new track. If a metadata is present along with the track mark, then it becomes the new last_metadata, otherwise, last_metadata becomes null`.
• seek (of type (float) -> float): Seek forward, in seconds (returns the amount of time effectively seeked).
• self_sync (of type () -> bool): Is the source currently controlling its own real-time loop.
• self_sync_description (of type () -> string):
• skip (of type () -> unit): Skip to the next track.
• time (of type () -> float): Get a source's time, based on its assigned clock.

Callbacks:

• on_collect (of type (synchronous : bool, (() -> unit)) -> unit): Call a given handler to be called when source is collected
• on_frame (of type (?before : bool, synchronous : bool, (() -> unit)) -> unit): Call a given handler on frame. When before is true, callback is executed before computing the frame and after otherwise
• on_frame_checksum (of type (?before : ((string?) -> unit)?, synchronous : bool, ((cache : string?, string) -> unit)) -> unit): Call a given handler Register callbacks to compute frame checksums for debugging purposes. This is useful to track frame content changes through the streaming pipeline. The before callback is called before computing the frame with the checksum of the cached frame (if any, null otherwise). The main callback is called after computing the frame with the checksum of the generated frame and the remaining cache (if any).
• on_metadata (of type (synchronous : bool, (([string * string]) -> unit)) -> unit): Call a given handler to execute on each metadata
• on_position (of type (position : {float}, ?remaining : bool, ?allow_partial : bool, synchronous : bool, ((float, [string * string]) -> unit)) -> unit): Call a given handler on track position. If remaining is false, callback is executed when position in track is more or equal to position. If remaining is true, callback is executed when remaining time in the current track is less or equal to position. Keep in mind that elapsed time is exact while remaining time is always estimated. Remaining time is usually more accurate for file-based sources. When allow_partial is true, if the current track ends before the offset position is reached, callback is still executed
• on_shutdown (of type (synchronous : bool, (() -> unit)) -> unit): Call a given handler to be called when source shuts down
• on_track (of type (synchronous : bool, (([string * string]) -> unit)) -> unit): Call a given handler on track marks
• on_wake_up (of type (synchronous : bool, (() -> unit)) -> unit): Call a given handler to be called after the source is asked to get ready

Composition methods:

• composition_type (of type (() -> string).{set : (string) -> unit}): This source inherits composition from its effective source.
• on_leave (of type ({source : source(audio='A), track_sensitive : bool}) -> unit where 'A is a track of type: pcm, pcm_s16, pcm_f32, yuv420p, metadata or track_marks and a track of type: pcm, pcm_s16 or pcm_f32): Called after switching away from this source in a switch operator, once the transition using the ending source has completed. Receives a record with source (the source being left) and track_sensitive (true if the ending source's last frame had a track mark, i.e. it finished naturally; false if it was preempted mid-track). This function must return quickly as it runs in the streaming thread. The default depends on the active composition profile: file sources (source.composition.file) skip the source when preempted mid-track so it starts fresh on its next selection, and do nothing when it finished naturally; live sources (source.composition.live) do nothing.
• on_select (of type ( { ending : source(audio='A)?, replay_metadata : bool, starting : source(audio='A) }) -> source(audio='A) where 'A is a track of type: pcm, pcm_s16, pcm_f32, yuv420p, metadata or track_marks and a track of type: pcm, pcm_s16 or pcm_f32): Called when selecting this source in a switch operator. Receives a record with starting (the incoming source) and ending (the previous source, or null when the ending source reached a track boundary). Returns the source to use. By default, both file and live profiles fade out ending when non-null (up to 1 second). The default is looked up at runtime from the active composition profile (source.composition.file or source.composition.live depending on composition_type).
• replay_metadata (of type {bool}): Whether to replay the latest metadata on this source when it is selected in a switch operator. Defaults to true. The value is looked up at runtime from the active composition profile (source.composition.file or source.composition.live depending on composition_type).
• single (of type bool): Forbid the selection of this source for two consecutive tracks in switch operators. Defaults to false.
• track_sensitive (of type {bool}): Whether this source insists on track boundaries in switch operators: when true, it prefers not to be interrupted mid-track and not to be started mid-track. A switch may only cut into a track that is still playing when at least one of the two sources involved has track_sensitive set to false; otherwise it waits for the playing source to reach a track boundary. File-based sources default to true; live network and hardware inputs default to false. The value is looked up at runtime from the active composition profile (source.composition.file or source.composition.live depending on composition_type).

metronome

Indicate beats.

Type:

(?frequency : float, ?float) -> source(audio='a)
where 'a is a track of type: pcm, pcm_s16 or pcm_f32 and a track

Composition:

This source uses file composition by default.

Arguments:

• frequency (of type float, which defaults to 440.0): Frequency of the sound.
• (unlabeled) (of type float, which defaults to 60.0): Number of beats per minute.

Methods:

• buffered (of type () -> [string * float]): Length of buffered data.
• clear_last_metadata (of type () -> unit): Clear the last metadata from the source.
• clock (of type clock): The source's clock
• duration (of type () -> float): Estimation of the duration of the current track.
• elapsed (of type () -> float): Elapsed time in the current track.
• fallible (of type bool): Indicate if a source may fail, i.e. may not be ready to stream.
• generate_frame (of type () -> unit): Generate a frame from the source without consuming it. This can be useful in advanced cases where generating a frame is required to trigger some side effect like calculating some metadata before making a decision. You should make sure that the source is available before calling this function and it should only be called inside synchronous streaming loop callback such as on_frame!
• id (of type () -> string): Identifier of the source.
• insert_metadata (of type (?override : bool, ?new_track : bool, [string * string]) -> unit): Dynamically insert metadata in a stream. Inserts a new track with the given metadata if new_track is true. When override is false, metadata that the source provides itself takes precedence over the inserted one.
• is_active (of type () -> bool): true if the source is active, i.e. it is continuously animated by its own clock whenever it is ready. Typically, true for outputs and sources such as input.http.
• is_ready (of type () -> bool): Indicate if a source is ready to stream. This does not mean that the source is currently streaming, just that its resources are all properly initialized.
• is_up (of type () -> bool): Indicate that the source can be asked to produce some data at any time. This is true when the source is currently being used or if it could be used at any time, typically inside a switch or fallback.
• last_metadata (of type () -> [string * string]?): Return the last metadata from the source.
• log (of type {level : (() -> int).{set : (int) -> unit}}): Get or set the source's log level, from 1 to 5.
• register_command (of type (?usage : string?, description : string, string, ((string) -> string)) -> unit): Register a server command for this source. Command is registered under the source's id namespace when it gets up and de-registered when it gets down.
• remaining (of type () -> float): Estimation of remaining time in the current track.
• reset_last_metadata_on_track (of type (() -> bool).{set : (bool) -> unit}): If true, the source's last_metadata is reset on each new track. If a metadata is present along with the track mark, then it becomes the new last_metadata, otherwise, last_metadata becomes null`.
• seek (of type (float) -> float): Seek forward, in seconds (returns the amount of time effectively seeked).
• self_sync (of type () -> bool): Is the source currently controlling its own real-time loop.
• self_sync_description (of type () -> string):
• skip (of type () -> unit): Skip to the next track.
• time (of type () -> float): Get a source's time, based on its assigned clock.

Callbacks:

• on_collect (of type (synchronous : bool, (() -> unit)) -> unit): Call a given handler to be called when source is collected
• on_frame (of type (?before : bool, synchronous : bool, (() -> unit)) -> unit): Call a given handler on frame. When before is true, callback is executed before computing the frame and after otherwise
• on_frame_checksum (of type (?before : ((string?) -> unit)?, synchronous : bool, ((cache : string?, string) -> unit)) -> unit): Call a given handler Register callbacks to compute frame checksums for debugging purposes. This is useful to track frame content changes through the streaming pipeline. The before callback is called before computing the frame with the checksum of the cached frame (if any, null otherwise). The main callback is called after computing the frame with the checksum of the generated frame and the remaining cache (if any).
• on_metadata (of type (synchronous : bool, (([string * string]) -> unit)) -> unit): Call a given handler to execute on each metadata
• on_position (of type (position : {float}, ?remaining : bool, ?allow_partial : bool, synchronous : bool, ((float, [string * string]) -> unit)) -> unit): Call a given handler on track position. If remaining is false, callback is executed when position in track is more or equal to position. If remaining is true, callback is executed when remaining time in the current track is less or equal to position. Keep in mind that elapsed time is exact while remaining time is always estimated. Remaining time is usually more accurate for file-based sources. When allow_partial is true, if the current track ends before the offset position is reached, callback is still executed
• on_shutdown (of type (synchronous : bool, (() -> unit)) -> unit): Call a given handler to be called when source shuts down
• on_track (of type (synchronous : bool, (([string * string]) -> unit)) -> unit): Call a given handler on track marks
• on_wake_up (of type (synchronous : bool, (() -> unit)) -> unit): Call a given handler to be called after the source is asked to get ready

Composition methods:

• composition_type (of type (() -> string).{set : (string) -> unit}): This source uses file composition by default.
• on_leave (of type ({source : source(audio='A), track_sensitive : bool}) -> unit where 'A is a track of type: pcm, pcm_s16 or pcm_f32 and a track): Called after switching away from this source in a switch operator, once the transition using the ending source has completed. Receives a record with source (the source being left) and track_sensitive (true if the ending source's last frame had a track mark, i.e. it finished naturally; false if it was preempted mid-track). This function must return quickly as it runs in the streaming thread. The default depends on the active composition profile: file sources (source.composition.file) skip the source when preempted mid-track so it starts fresh on its next selection, and do nothing when it finished naturally; live sources (source.composition.live) do nothing.
• on_select (of type ( { ending : source(audio='A)?, replay_metadata : bool, starting : source(audio='A) }) -> source(audio='A) where 'A is a track of type: pcm, pcm_s16 or pcm_f32 and a track): Called when selecting this source in a switch operator. Receives a record with starting (the incoming source) and ending (the previous source, or null when the ending source reached a track boundary). Returns the source to use. By default, both file and live profiles fade out ending when non-null (up to 1 second). The default is looked up at runtime from the active composition profile (source.composition.file or source.composition.live depending on composition_type).
• replay_metadata (of type {bool}): Whether to replay the latest metadata on this source when it is selected in a switch operator. Defaults to true. The value is looked up at runtime from the active composition profile (source.composition.file or source.composition.live depending on composition_type).
• single (of type bool): Forbid the selection of this source for two consecutive tracks in switch operators. Defaults to false.
• track_sensitive (of type {bool}): Whether this source insists on track boundaries in switch operators: when true, it prefers not to be interrupted mid-track and not to be started mid-track. A switch may only cut into a track that is still playing when at least one of the two sources involved has track_sensitive set to false; otherwise it waits for the playing source to reach a track boundary. File-based sources default to true; live network and hardware inputs default to false. The value is looked up at runtime from the active composition profile (source.composition.file or source.composition.live depending on composition_type).